OWON SDS Series User Manual
Page 30
Advertising
5.Advanced User Guidebook
Figure 5-6 Original Waveform
Figure 5-7 Inverted Waveform
5. To set bandwidth limit (SDS6062(V), SDS7072(V) does not have this function)
When high frequency components of a waveform are not important to its analysis,
the bandwidth limit control can be used to reject frequencies above 20 MHz.
Taking the Channel 1 for example, the operation steps are shown as below:
(1) Press the CH1 MENU button to show CH1 SETUP menu.
(2) Press the H4 button and the Limit menu will display.
25
Advertising
This manual is related to the following products: