OWON SDS Series - Manual (Page 67)

5.Advanced User Guidebook
Operate
Play
Stop Begin to record
Stop recording
Note:
Both of the waveforms of Channel 1 and Channel 2 will be recorded. If a Channel is
turned off while recording, the waveform of the channel is invalid in the playback
mode.
Figure 5-54: Frame setting (Record to external)
To use wave record to external, do as follows:
1. Press Save button.
2. Press H1 button, turn the M knob to choose Record.
3. Press H2 button. In the Mode menu, press F2 button to choose Record. Press H3
to choose External as the storage medium.
4. Press H3 button. In the Frame Set menu, press F1 button and turn the M knob to
set End frame; press F2 button and turn the M knob to select the interval between
recorded frames. Press F3 to wave record to external infinitely if necessary, and
end frame will display “-”.
5. Press H4 button, choose whether to refresh the wave when recording.
6. Press H5 button to start recording.
Connect external device to the computer, and wave_record_0.bin is the recorded
file. Open the software, and do as follows to play back the waveform.
1. Choose Communications Auto Player.
2. Transform recording waveform from machine.
3. Add the well transformed files.
4. Set play mode and time delay.
5. Click the green button on the left corner to begin playing back the waveform.
62