OWON SDS Series - Manual (Page 60)

5.Advanced User Guidebook
6. Click Apply at the top left of the menu. Then click Yes on the pop-up warning to
begin formatting.
Figure 5-43: Apply setting
7. Formatting process
Figure 5-44: Format process
8. Format U disk successfully
Figure 5-45: Format successfully
How to Cut and Recall a waveform
To cut waveform between two time cursors, generate a file with the suffix “*.ota”,
and save it to external memory device. To recall the waveform is to use AG1022F or
AG2052F manufactured by OWON to read *.ota and recall the waveform being cut
from oscilloscope.
55