Smart Avi SmartNet-V - Manual (Page 12)

Page 12 MNSNV102005Ver1.0
Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation
System Power ON System Power ON System Power ON System Power ON System Power ON
You are now ready to turn on the system. Make sure that all connections are plugged in and all
video monitors that you wish to use are connected.
1. Plug in the power adapter to the back of the SmartNet-V unit. Connect this power cord
to the wall.
2. Turn computer on and make sure that the boot up process has completed.
3. Observe to see if LEDs are lit. The receiver have one LED while the SmartNet-V
unit has two. One of those LEDs is for the power and the other is to indicate that the
unit is functioning properly.