Smart Avi SmartNet-V - Manual (Page 8)

Page 8 MNSNV102005Ver1.0
Connecting the SmartNet-V (Detailed Instructions)
Video and Audio Inputs Video and Audio Inputs Video and Audio Inputs Video and Audio Inputs Video and Audio Inputs
The video input for the SmartNet-V is a standard RCA composite connection.
Connect all of the Input video sources to the back of the SmartNet-V unit.
Hint: You may want to label the input video connections so as not to lose track of where
the signal is coming from. Later on when the software is installed you will be able to give
each connection a name and the software will remember it for you. This way you can
switch the video connections without having to look at the physical connections on the
back of the unit. (You can also use the included page at the end of this manual in order
to keep track of the connections as you make them.)
The audio inputs for the SmartNet-V are standard RCA stereo connectors.
Connect all of the audio inputs to the back of the SmartNet-V unit. Most audio sources
usethis standard connection but there is other equipment such as computers where a
special adapter cable will be needed. Such as a 3.5mm miniplug to stereo RCA cable.
Make sure that the audio and video are coming from the same source and are plugged in
within the same set of RCA connectors. For example. The audio from one computer should
have its video plugged in right next to it.
Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation Chapter 2: Installation