Smart Avi SmartNet-V - Manual (Page 5)

Page 5 MNSNV102005Ver1.0
Overview Overview Overview Overview Overview
Sometimes AV signals need to be transmitted over long distances, sometimes greater than com-
monly specified product limitations of 15 feet. In this case several choices are available, but most are
expensive and bulky, which is some cases is simply not practical, due to space limitations in the
conduits
The SmartNet-V is a high-quality switching matrix for composite video signals. This basic signal
format is widely used by many viideo products..Standard RCA connectors are used for the input as
well as the output video signal. All that is required is a standard RCA video cable to connect to the
signal source.
The units contain a very high bandwidth routing matrix for the Red, Green and Blue video channels
and separate switching layers for Horizontal and Vertical Syncs. The color signals are balanced
internally and combined with the syncs. This combined signal is then driven out through standard
RJ45s on the front panel. Standard SmartAVI VGA receiver units are used at the end of each CAT 5
cable to recover the signals. High quality receiver circuits incorporating cable loss compensation
provide excellent results up to resolutions of 1600 x 1200 @85Hz.Compatible with all types of UTP
and STP cable, the receivers can have optional internal skew compensation fitted, which solves the
problem of delay errors found in the higher specification structured cabling.
Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction Chapter 1: Introduction
•
Wall Displays
•
Audio Visual Presentation
•
Digital media
•
Shopping centers
•
Airports
•
Security
•
Dealer Rooms
•
Point of sale
•
Control rooms
•
Hotels
Applications Applications Applications Applications Applications