Teac DR H338i - Manual (Page 21)

21
EN
G
LI
SH
Recording a source
You can record a source onto a CD or a cassette tape connected to
the DIGITAL OUT terminal or the LINE OUT jacks.
1. Select a source to be recorded by pressing the SOURCE button.
2. Start recording.
< The volume, and tone control (DVS, LOUDNESS and TONE) have no
effect on the recording signals.
Dimmer
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.
Muting
To mute the sound temporarily, press the MUTING button. Press
the MUTING button again to restore the sound.
< “MUTING” blinks on the display while muting is engaged.
< If you change the volume when the sound is muted, it will be
unmuted.
Adjusting the bass and treble
You can change the bass and treble sound between “–5” to “+5”.
1
If the LOUDNESS function is on, press the LOUDNESS
button to turn it off.
< When the LOUDNESS function is on, the bass and treble sound
level automatically set to “0”.
2
Press the TONE button repeatedly to select Bass or
Treble.
3
Press the VOLUME buttons to adjust the sound level
within 5 seconds.
The higher the treble number, the more the high frequencies
are emphasized.
The higher the bass number, the more the low frequencies are
emphasized.