Teac DR H338i - Manual (Page 46)

46
The unit can be programmed to turn on at a specified time.
< Adjust the clock before setting the timer (page 19).
1
If the unit is on, press the STANDBY/ON button to turn it
off (standby).
2
Press the CLOCK button.
3
Press the TIMER button.
“Timer Set” appears on the display, and the “hour” value starts
blinking.
< When no button is pressed for 30 seconds, the timer setting
mode will be cancelled.
4
Press the Volume buttons to set the start time (hour), and
then press the TIMER button.
The “minutes” value starts blinking.
Sleep Timer Wake Up Timer
The power can be switched off after a specified amount of time.
Press the SLEEP button repeatedly until desired time appears on
the display.
SLEEP-10, 20, 30, 60 or 90
The power will be switched off 90 (60, 30, 20, or 10) minutes later.
SLEEP OFF
The sleep timer is off.
< If you want to check the remaining time, press the SLEEP button
once. The remaining time will be displayed for 3 seconds, and then
return to the normal display.