Teac AD-RW900-B - Manual (Page 19)

19
ENGLISH
Listening with headphones
To listen with headphones, turn the LEVEL knob to minimize the
volume level before connecting the headphones plug to the
PHONES jack. Then, adjust the volume after connecting the plug.
Q CAUTION
Do not connect headphones to the PHONES jack while
wearing them. Moreover, do not disconnect headphones or
turn the unit on or off while wearing them. Very loud sound
could be output from the headphones.
AVOID DAMAGING YOUR HEARING—Do not put on
headphones until after plugging them in.
Selecting a source for playback/recording
Each time the SOURCE button is pressed, the source changes as
follows:
PHONO IN
LINE IN
The selected source is shown on the upper left of the display
except for PHONO IN, which is shown at the bottom of the display.
< During recording, the source cannot be changed.
< Pressing the play button for a source also selects and starts
playback of that source.
< Select “LINE IN" to listen to a source connected to the analog
LINE IN jacks.
< Select “PHONO IN” to listen to a record player connected to the
PHONO jacks.
< Select “ ” to listen to a digital source connected to the
DIGITAL IN terminal.