Teac AD-RW900-B - Manual (Page 28)

28
Listening to a Cassette Tape (1)
You can play Normal (type ), Chrome (type ) and Metal (type ) tapes
with this unit.
NOTE
For the sake of simplicity, we refer to the tape side facing you
as “side A” and to the tape side facing away as “side B” in this
manual.
When you insert a cassette with “side A” and “side B” reversed,
read “side A” as “side B” and “side B” as “side A”.
“Side A” faces you
“Side B” faces away
1
Press the SOURCE button repeatedly to select “TAPE”.
< When a different source is selected, starting tape playback
automatically selects the tape.
2
Press the TAPE EJECT (L) button to open the cassette
tape compartment.
3
Put a cassette tape in the compartment.
Insert the cassette tape with its open edge facing down and the
side that you want to play facing you. Then, close the cassette
compartment by pushing its door in.
CAUTION
< Do not use deformed or slack cassette tapes.
< Do not force the door of the compartment by hand when
opening it.
Failure to follow any of the above cautions could cause
malfunction.
4
Set the reverse mode setting using the REV MODE switch.
You can select one of three settings.
u One way mode
j Two way mode
p Repeat mode