Erasing tracks from a disc (cd-rw only) – Teac AD-RW900-B User Manual

Page 38

Advertising
background image

38

1

Press the input SOURCE button and select CD mode.

2

Load a CD-RW that has not been finalized or has been

unfinalized.

< If you load a finalized disc, “UNFINALIZE” will appear. You must

unfinalize the disc before you can erase tracks on it (page 37).

3

Press the FINALIZE/ERASE button in the stop mode.

< Each time the ERASE button is pressed, the display changes as

follows:

FINALIZE

Z

ERASE #

(# is the last track number)

(Not shown if only 1 track recorded)

Z

ERSAE DISC

Z

Ordinary playback mode

(total number of tracks and total playback time)

< If a finalized disc is loaded, “UNFINALIZE” is displayed. Because

a finalized disc cannot be erased, you need to unfinalize it first
(page 37).

Erasing tracks from a disc (CD-RW only)

Erasing the last track

Press the FINALIZE/ERASE button until “ERASE” and the last track
number appear on the display.

< You can also erase all the tracks from the currently selected track

number to the last track at once. To do this, use a skip (. or
/) button to select the track from which you want to start
erasing. (You cannot erase only certain tracks before the last
track.)

Erasing all tracks (ordinary mode)

< Press the FINALIZE/ERASE button until “ERASE DISC” appears on

the display.

4

Press a CD Play/Pause (t/J) button to start erasing.

The track(s) will be erased.
After erasure completes, the display will return to its ordinary
appearance (total number of tracks and total playback time).

< Do not turn off the power or disconnect the power cord during

erasure.

< During erasure, buttons will not function when pushed.
< Erasure cannot be undone! Be sure that you want to erase the

contents of a CD before starting.

Advertising
This manual is related to the following products: