Assigning direct folders individually, Automatically assign all direct folders (auto set), Auto set) – Teac CD-200SB User Manual
Page 33: See “automatically assign, 6 – direct folder function
TASCAM CD-200SB
33
6 – Direct folder function
Assigning direct folders individually
1. Press the MEDIA SELECT button on the main unit or the
remote and select the media that contains the folder that
you want to assign as a direct folder. (See “Selecting the
2. Press the main unit SET [AUTO SET] button or the remote
SET button to enable direct folder setting mode.
When this mode is enabled, the main unit SET [AUTO SET]
indicator lights, and
SET
and the name of the current folder
appear on the display alternately.
The indicators for the FOLDER/TRACK SELECT (1–10/0)
buttons that do not yet have direct folder assignments and
the CANCEL indicator blink. The indicators for the FOLDER/
TRACK SELECT (1–10/0) buttons that already have direct
folder assignments light.
When the main unit CANCEL indicator is blinking, you can
press the CANCEL button on the main unit or the remote to
cancel assignment and return to ordinary playback mode.
NOTE
You can overwrite an existing direct folder assignment to change
it. (See “Changing individual direct folder assignments” on page
34.)
3. Use the FOLDER g/t buttons on the main unit or the
remote control to select (show) the folder you want to assign
as a direct folder.
The current folder name shown on this display changes each
time you change the selection.
4. Choose a FOLDER/TRACK SELECT (1–10/0) button that
does not yet have a direct folder assignment (Indicator
blinking) and press the button to assign the folder.
After registration completes,
DONE
will appear on the display
for a few seconds and then the unit will return to ordinary
playback mode.
Automatically assign all direct folders (AUTO
SET)
1. Press the MEDIA SELECT button on the main unit or the
remote and select the media that contains the folders that
you want to assign as direct folders. (See “Selecting the
2. When stopped, press the SET [AUTO SET] button while
pressing and holding the main unit DISPLAY [SHIFT] button
or press the remote AUTO SET button to enter direct folder
AUTO SET mode.
When this mode is enabled, the main unit SET [AUTO SET]
indicator blinks, and
AUTO SET
appears on the display.