Teac CD-200SB - Manual (Page 42)

42
TASCAM CD-200SB
8 – Erase folder function
Using this unit, you can erase unwanted folders containing
audio files on SD cards and USB flash drives.
CAUTION
• You cannot use this unit to erase individual files.
• All files (not just music files) in the designated folder will be
erased, regardless of their statuses (Read Only, etc.).
Erasing folders
1. Use the MEDIA SELECT button to select the media (SD card
or USB flash drive) that contains the folder you want to erase.
2. Press the main unit BROWSE [ERASE FOLDER] button while
pressing and holding the DISPLAY [SHIFT] button or press
the remote ERASE FOLDER button to enter erase folder
mode.
When erase folder mode is enabled, the main unit BROWSE
[ERASE FOLDER] and CANCEL indicators blink, and
ERASE
and the name of the current folder appear alternately on the
display.
3. If you want to erase the currently selected folder, skip to the
next step.
If you want to erase a folder of audio files other than the
currently selected folder, select the folder that you want to
erase using the main unit FOLDER/TRACK SELECT (1–10/0)
buttons, the remote number (1–10/0) buttons and the
FOLDER g/t buttons on the main unit or the remote
control.
NOTE
When the main unit CANCEL indicator is blinking, you can press
the CANCEL button on the main unit or the remote to cancel
erasing the folder. The display returns to its state before entering
erase folder mode.
4. When the folder is selected, press the main unit BROWSE
[ERASE FOLDER] button or the remote ERASE FOLDER
button again to erase the folder.
ERASING
appears on the display for a few seconds while the
folder is being erased.
If the selected folder does not have a subfolder, all the files
in it (not just music files) will be erased. If this results in
the folder that contained the erased folder also becoming
empty, that folder will also be erased.
If the selected folder has a subfolder, all the files (not just
music files) in the folder except the files in the subfolder will
be erased.
NOTE
• If the selected media (SD card/USB flash drive) is write-
protected, the erase folder function will not function. In this
case,
PROTECT
will appear on the display for a few seconds
and the unit will return to its previous state.
• If a folder that is assigned to a main unit FOLDER/TRACK
SELECT (1–10/0) button is erased, that assignment will
automatically be cleared.