Teac CD-200SB - Manual (Page 44)

44
TASCAM CD-200SB
9 – Message Lists
Error messages
If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct
the problem, please contact the nearest retailer or TASCAM representative.
Message Meaning Response
COMM ERR
(Blinking)
Cannot communicate with the CD drive.
Contact the nearest retailer or TASCAM represen-
tative.
COMM ERR An error occurred during communication with the CD drive.
Contact the nearest retailer or TASCAM represen-
tative.
DEC ERR The file type is not supported or otherwise could not be played. Change the disc
DISC ERR
The TOC or file system could not be read, or focus adjustment was
not possible.
Clean or change the disc.
DRV ERR The CD drive hardware is broken.
Contact the nearest retailer or TASCAM represen-
tative.
MEDIAERR The file system cannot be read.
Format the media using a computer. If this does not
work, try replacing the media.
PATH ERR
The path might either be too long or contain characters that the
unit cannot recognize.
Revise the folder and file names so that the path,
including the file extension, contains only ASCII
characters and is no more than 255 characters. (The
maximum number of folder levels is 16.)
READ ERR The track cannot be accessed. Clean or change the disc.