Tri Tool 602-5SBM Clamshell Air - Manual (Page 10)

10
TRI TOOL INC.
92-0093 Rev. 131230
NOTE:
MAINTENANCE
Clean Up
All components should be cleaned and coated with a light film of oil prior to use. Use
a clean, non-detergent oil, preferable SAE 10 (90 SSU) or lighter.
Air supply for the Model 602.5SBM Clamshell with an Air Motor requires an
adequate filter/regulator/lubricator (FRL) to be used.
The Motor warranty is void if damage occurs from contaminated air or lack of
lubrication.
If the Clamshell is operated in such a manner that the Tool Blocks collect debris
while cutting, the Tool Blocks and the Feed Screw should be cleaned after each
cutting operation.
RECOMMENDED MAINTENANCE SCHEDULE
Daily maintenance when the unit is in operation
Wipe the unit down and spray with rust preventative under severe humidity
conditions.
Visually inspect for loose screws, missing screws, damage, etc.