Tri Tool 602-5SBM Clamshell Air - Manual (Page 32)

32
TRI TOOL INC.
92-0093 Rev. 131230
Left Hand Sever and Bevel Tool Bit Set
SEVER AND BEVEL TOOL BIT SETS
Left Hand Sever and Bevel Tool Bit Sets have been designed to bevel the end of the
pipe or tube, which is cut from the pipe, or tube on which the Clamshell is mounted.
Left Hand Sever and Bevel Tool Bit Sets
Range
Max Wall
Thickness
Pipe or
Tube
Material
Bevel Tool
Bit P/N
Sever
Tool Bit
P/N
Left Hand Sever and 37.5O Bevel Tool Bits for use with the Standard Tool Block
(P/N 08-0036)
1 1/2" pipe sch 5 & 10
2" & 2 1/2" pipe sch 5 thru 160
3" (76.2 mm) OD tube
.450" 11.4 mm CS, SS
99-1636 99-1637
1" thru 2" pipe all sch
2 1/2" pipe sch 5 thru 160 3"
(76.2 mm) OD tube
99-1264 99-1265
Left Hand Sever and 37.5O Bevel Tool Bits for use with the Low Profile Tool Block
(P/N 08-0096)
1 1/2" pipe sch 5 thru 40
2" & 2 1/2" pipe sch 5 thru 160
3" (76.2 mm) OD tube
.450" 11.4 mm CS, SS 99-1956 99-1957