Tri Tool 602-5SBM Clamshell Air User Manual
Page 18
Advertising
18
TRI TOOL INC.
92-0093 Rev. 131230
TRIPPER
SHAFT
ASSEMBLY
TRIPPER LEVER
SHOULDER BOLT
BALL PLUNGER SET SCREW
Tripper Shaft Installation
TRIPPER BLOCK ASSY LUBRICATION AND TRIPPER SHAFT ADJUSTMENT
Back off the Ball Plunger Set Screw until it disengages from the Tripper Shaft
Assembly.
Remove the Shoulder Bolt then remove the Tripper Lever.
Remove the Tripper Shaft Assembly from the block then degrease and clean all
parts.
Apply fresh lubrication to the Tripper Shaft Assembly and Shoulder Bolt.
Reassemble in reverse order.
Advertising