Tri Tool 602-5SBM Clamshell Air - Manual (Page 36)

36
TRI TOOL INC.
92-0093 Rev. 131230
Socket Weld Removal Tool Bit
SPECIAL TOOL BIT SETS
Socket Weld Removal Tool bits have been designed to remove the weld from a weld
type socket joint.
These Tool Bits also require special Tool Holders.
Socket Weld Removal Tool Bit
Range
Max Wall
Thick-
ness
Pipe or
Tube
Material
Socket
Weld Re-
moval Tool
Bit P/N
Tool Bit Length
Socket Weld Removal Tool Bit for use with the Standard Tool Block (P/N 08-0036) us-
ing the Socket Weld Removal Tool Holder (P/N 49-0046)
1.315" (33.4 mm) min OD
.400" CS, SS
99-1853 2.00" 50.8 mm
3.000" (76.2 mm) max OD 99-1600 2.38" 60.5 mm
Socket Weld Removal Tool Bit for use with the Low Profile Tool Block (P/N 08-0096)
using the Socket Weld Removal Tool Holder (P/N 49-0039)
1.780" (45.2 mm) min OD
.400" CS, SS 99-2148 1.38" 35.1 mm
3.000" (76.2 mm) max OD