Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 12)

10
3. The LCD Control Panel
Figure 1-7 below shows the LCD Control Panel. This panel has a two-line by 20 character LCD display to
provide user feedback and eight push buttons to control the operation of this system. The functions for
these buttons are shown in Table 1-1.
Figure 1-7 LCD Control Panel Layout
Table 1-1: Front Panel Controls
Control Name Function
Up Scroll up through the menu or list.
Down Scroll down through the menu or list.
ENT Enter Execute the function. Also referred to as OK in the Menus.
ESC Escape Go back to the previous function.
Copy Copy
Quick key to make a copy. Pressing this key automatically performs the
AUTOCOPY job.
Test Test
Quick key to make a simulation of the copy process. Pressing this key
automatically performs the Test job.
Speed Speed
Quick key to change the duplication speed. Pressing this key automatically
guides you to the functions that allow you to change various duplication speeds.
Source Source
Quick key to change the master reading source. However, since HDD is the only
valid source, no other options are offered at the time of this publication.