Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 35)

33
All Stored Data will be erased.
Press OK to Continue
Hard Drive Setup
8.Display Order
Display Order
Default
Display Order
Alpha – (Asc)
Display Order
Alpha – (Dec)
Duplicator 3.37
1.Copy (SM)
Duplicator 3.37
12.Print Setup
Print Setup
1.Load Label
Loading Master
Please Select Label
1.[Load All Labels]
Press the ENT/Enter button to format the Hard Drive. After
the Hard Drive has been formatted, the system will return
you to the Format Hard Drive menu.
11.8 Display Order
The Display Order option allows you to change the display order of the existing partitions/images in the hard
drive when you use the
Up or Down button to find and select the partition. To change the display order,
use the Up or Down button to navigate to the 8. Display Order menu:
Press the ENT/Enter button to enter the Display Order menu.
Use the Up or Down button to select whether Display Order is Default,
Alpha-(Asc) or Alpha-(Dec) and press the ENT/Enter button to select that
option.
 Default: By select this option, the partitions will be in chronological
order.
 Alpha – (Asc): By select this option, the partitions will be in
alphabetic order.
 Alpha – (Dec): By select this option, the partitions will be in
reverse alphabetic order.
12. Print Setup
The Print Setup menu consists of functions related to the label printing operation. Each of these menus is
discussed in its own subsection.
If you are starting from the Copy Menu, do the following:
Use the Up or Down button to find Print Setup.
Press the ENT/Enter button at Print Setup to enter the menu. Use the
Up
or Down button to select between the following options.
12.1 Load Label
This function allows you to load your LightScribe Label file (.lsi file) from the Label Disc onto the system’s
internal hard drive.
For instructions on how to generate the LightScribe Label, please refer to “Appendix B – Design and Create
a Label File” on page 59.
Press the ENT/Enter button to enter the Load Label menu.
The autoloader will pick up a disc that contains your LightScribe label file
and place it into a drive for analyzing.
Upon successfully analyzing your label disc, you have the following
options: