Vinpower Digital Titan Lightscribe Autoloader User Manual
Page 30
28
Duplicator 3.37
1.Copy (SM)
Duplicator 3.37
8.Select Burn Speed
HDD to CD Speed
32x
HDD to CD Speed
Adjusted to: 8x
8. Select Burn Speed
The Select Burn Speed menu option or the Speed quick key is used to adjust the duplication speed for the
various disc formats. By default, the duplication speed will be set to the optimal speed. However, under
some circumstances you might want to lower down the duplication speed. Those circumstances are:
Poor Blank Media Quality - When your media quality is sub-par, lowering the duplication speed is
necessary to make good copies.
Duplication Quality - Overall, the lower the speed, the higher the quality of your duplicates. If you
have time, it is a good choice to lower the speed to produce the best quality duplicates.
If you are at the Copy Menu, do the following:
Use the Up or Down button to find the Select Burn Speed menu.
Press the ENT/Enter button at Select Burn Speed menu and you will see
the Select Burn Speed menu similar to below:
There are three recording speed types that can be set:
HDD to CD: Copy Hard Drive CD Content to CD-R/RW Discs.
HDD to DVD: Copy Hard Drive DVD Content to DVD±R/RW Discs.
HDD to DVD-DL: Copy Hard Drive Double/Dual Layer DVD Content to DVD DL±R/RW Discs.
HDD to BD-SL: Copy Hard Drive Blu-Ray Content to BD-R/RE Discs.
HDD to BD-DL: Copy Hard Drive Double/Dual Layer BD Content to BD DL±R/RE Discs.
HDD to BD-XL: Copy Hard Drive Triple Layer BD Content to BD XL±R/RE Discs.
Depending upon the type of duplication and your autoloader restrictions, you need to select the correct
format in order to take effect. To select the recording speed options, use the
Up or Down button to
find the desired speed for the appropriate format and press the ENT/Enter button to enter the menu. You
will see a menu similar to this:
Use the Up or Down button to find the desired speed. Press the
ENT/Enter button to set the desired recording speed.
These options might change depending on the CD, DVD or Blu-Ray Disc Writers pre-installed in your
system.
Note: The speed that you choose may be adjusted by the drives and/or the media for optimized
duplication.
Once your selection has been changed successfully, you will see the following screen for 2 seconds:
You will automatically be returned to the Main Menu.
Select Burn Speed
HDD to CD Speed