Vinpower Digital Titan Lightscribe Autoloader User Manual

Page 32

Advertising
background image

30

Quick Erasing...

0/25

Duplicator 3.37
1.Copy (SM)

Duplicator 3.37
11.Hard Drive Setup

Hard Drive Setup
1.Select Partition

Choose Partition
[Reserved.VEF] 82MB

Choose Partition

[FUN.VEF] 4012MB

The “0” indicates that zero discs have been erased so far. The “25” indicates
the number programmed into the counter. Once all the discs have been
erased, you will see one of these PASS/FAIL screens:

Counter Specified

No Counter Specified

PASS 25 FAIL 0
Job Completed! Press OK to Finish

or:

Input Bin Empty
Reset Hoppers?

“PASS 25” indicates 25 discs have been

erased successfully.


“FAIL 0” indicates no discs have failed

the erase process.


Press the ENT/Enter button to finish

“Input Bin Empty” indicates that the
system has run out of discs to erase.


If you have more discs to erase, you can
empty the Output Spindle; place the discs
to be erased in the Input Spindle and Press
the ENT/Enter button to continue.

If you have no more discs to erase, press
the ESC/Escape button to terminate the
operation.


11. Hard Drive Setup

The Hard Drive Setup menu consists of functions related to the Hard Drive operation. Each of these menus
is discussed in its own subsection.
If you are at the Copy Menu, do the following:


Use the Up or Down button to find Hard Drive Setup.


Press the ENT/Enter button on Hard Drive Setup to enter the menu. Use
the Up or Down button to select between the options.

11.1 Select Partition

The Select Partition submenu is used to select the partition on the Hard Drive that will be used as the default
partition choice for various Hard Drive related tasks.


Press the ENT/Enter button to enter the Select Partition menu.

Use the Up or Down button to select the desired partition. The
RESERVED partition is reserved for use by the System under Multi Master
Mode
.

Note: The RESERVED partition can also be renamed to a customized
name in order to keep the content permanently if desired.


Press the ENT/Enter button to select the desired partition (named FUN in this example).

Advertising
This manual is related to the following products: