Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 31)

29
Duplicator 3.37
1.Copy (SM)
Duplicator 3.37
9.Master Mode
Master Mode:
Single Master
Master Mode:
Multi Master
Duplicator 3.37
1.Copy (SM)
Duplicator 3.37
10.Erase
Counter:
No Counter
Loader Processing
Input Bin > Drive 1
Processing ...
Please Wait
Erase
Full Erase
Erase
Quick Erase
9. Master Mode
The Master Mode menu is used to select between Single Master mode or Multi Master mode. For more
information on the modes, see “Single Master and Multi Master Modes” on page 16.
If you are at the Copy Menu, do the following:
Use the Up or Down button to find the Master Mode menu.
Press the ENT/Enter button on Master Mode to enter the menu and you will
see one of the following screens:
Use the Up or Down button to choose between Multi Master Mode
and Single Master Mode. Press the ENT/Enter button to enter your
selection. The system will return you back to the main menu.
10. Erase
Use the Erase menu to erase your Rewritable discs.
Use the Up or Down button to find the Erase menu.
Press the ENT/Enter button on Erase to enter the menu and you will see
the following screens:
There are two options:
 Full Erase: This option erases the entire disc, destroying all
previously written data in the process.
 Quick Erase: This option erases the index (TOC) of the Rewritable
disc, not the data section. It is much faster than Full Erase.
However, the data section is still recoverable. In order to ensure all
old content on the RW/RE disc is completely erased and unable to
be recovered for security purposes, you must utilize the FULL
ERASE function.
Use the Up or Down button to select between the two options and press the ENT/Enter button to
continue.
Follow the instructions shown in “Setting Counters” on page 17 to continue.
Once the counters have been set, press the ENT/Enter button to confirm.
The Robotic Arm will initiate and pick the discs to be erased from the Input
Spindles and place them into the drives. As soon as the drives are all full, or
the number programmed into the counter is reached, you will see the
following:
The system will check all discs in the drive and prepare them to be erased.
As soon as the checking process completes, the Erase process starts.