Vir2 Instruments Studio Kit Builder - Manual (Page 14)

STUDIO KIT BUILDER
USING KONTAKT AS AN AUDIOUNIT PLUG-IN IN LOGIC PRO, LOGIC
STUDIO, LOGIC EXPRESS, ETC.
Users of Apple’s Logic can use Kontakt as an AudioUnit plug-in. These
instructions have been prepared in Logic Pro 8, although Kontakt may also
work in earlier versions if the computer meets the system requirements.
Once inside your Logic project, go to the Track mini-menu (in the central
area of your screen) and choose Track > New...
[01]
The New Tracks dialog box will appear. Make sure Software Instrument is
selected, then click Create.
[02]
The new instrument track will be created. On the left side of the screen you
will see the channel strip for that channel, including a fader, pan knob, and
various insert slots. Locate the blank slot just below the letters “I/O” and
above the output pair:
[03]
Click there, and a list of available instrument plug-ins will appear. Choose AU
Instruments > Native Instruments > KONTAKT 5 > Stereo.
[04]
01
02 03
04
09