Vir2 Instruments Studio Kit Builder User Manual
Page 17
Once the project is open, go to the Track menu and choose New...
[03]
In the dialog box that appears, choose the appropriate options, such as the
following: create 1 new stereo Instrument Track in samples. Then click Create.
[04]
Go to the Mix window and look at the channel strip for the instrument. At the
very top is an area for Inserts A-E.
[05]
Click on the first of the five slots, and navigate through the popup menu to
choose multichannel plug-in > Instrument > KONTAKT 5.
[06]
The Kontakt window will appear. At this point, you can skip down in the
instructions to the Getting Started With STUDIO KIT BUILDER section below.
USING KONTAKT AS A PLUG-IN IN ANOTHER HOST
There are too many host programs to cover here in detail, but any modern
sequencer that properly supports the VST, AudioUnit, or RTAS standards
should be able to use Kontakt properly, and load STUDIO KIT BUILDER
within it. Consult the manual for your specific host to find out how to
instantiate the Kontakt virtual instrument.
03
04
06
05
12