Vir2 Instruments Studio Kit Builder - Manual (Page 24)

STUDIO KIT BUILDER
SEND FX
Reverb - Pre Delay - Introduces a short delay between the direct signal and
the reverb trail build-up. This corresponds to the natural reverberation
behavior of large rooms, where a short time elapses before the first
reflection of a sound wave returns from a wall.
Size - Adjusts the size of the simulated room. This affects the duration of the
reverb trail.
Color - This control allows you to adjust the construction material of the
simulated room and, consequently, the color of the reverb trail. Low values
simulate softer surfaces like wood, while high values simulate the reflection
behavior of hard surfaces like concrete.
Damping - Sets the amount of simulated absorption that takes place in
rooms due to furnishings, people, or acoustic treatments affecting the
reflection behavior.
Return - Adjusts the reverb return level.
Chorus - Depth - Adjusts the range of modulated detuning. Higher values
give a more pronounced chorusing effect.
Speed - Adjusts the LFO speed. To synchronize the speed to your host or
Master Editor tempo, click on the Speed parameter’s unit display and choose
a note length value from the drop-down list.
19