3 warranty conditions – Watson-Marlow Bredel 265 User Manual

Page 13

Advertising
background image

WARRANTY CONDITIONS

13

3

WARRANTY CONDITIONS

The manufacturer offers a two-year warranty on all
parts of the hose pump. This means that all parts will be
repaired or replaced free of charge, with the exception
of consumables such as pump hoses, hose clamps, ball
bearings, wear rings, seals and rubber bushes, or parts
which have been used wrongly, misused, whether or
not they have been intentionally damaged. If genuine
Watson-Marlow Bredel (hereafter called Bredel) parts
are not used, any warranty claim is void.

Damaged parts which are covered by the applicable
warranty conditions can be returned to the
manufacturer. The parts must be accompanied by a
fully filled in and signed safety form, as present in the
back of this manual. The safety form must be applied to
the outside of the shipping carton. Parts which have
been contaminated or which have been corroded by
chemicals or other substances which can pose a health
risk must be cleaned before they are returned to the
manufacturer. Furthermore, it should be indicated on
the safety form which specific cleaning procedure has
been followed, and that the equipment has been
decontaminated. The safety form is required even if the
parts have not been used.

Warranties purporting to be on behalf of Bredel B.V.
made by any person, including representatives of
Bredel B.V., its subsidiaries, or its distributors, which do
not accord with the terms of this warranty shall not be
binding upon Bredel B.V. unless expressly approved in
writing by a Director or Manager of Bredel B.V.

Advertising
This manual is related to the following products: