Watson-Marlow Bredel 265 - Manual (Page 77)

SPECIFICATIONS
77
11.1.3 Surface treatment
•
After surface preparation, one layer of two-component acrylate is used for
surface protection. Standard color is RAL 3011, however other colors are
optional. Contact your Bredel representative for details on surface treatment.
•
All galvanized parts, exclusive of mounting articles, have been provided with an
electrolytic zinc layer of 15 - 20 microns (0.6 - 0.8 mil).
11.1.4 Lubricant table pump
The relative density of Bredel Genuine Hose Lubricant is 1.245.
Bredel 265 Bredel 280 Bredel 2100
Lubricant Bredel
*
* Bredel Genuine Hose Lubricant is registered at NSF: NSF Registration No 123204; Cate-
gory Code H1. See also: www.NSF.org/USDA.
Bredel * Bredel *
Required quantity per pumphead [US gal] 5.3 10.6 15.8
Should you require additional information with respect to the safety data
sheet, consult your Bredel representative.