Watson-Marlow Bredel 265 - Manual (Page 32)

COMMISSIONING
32
6 COMMISSIONING
6.1 Preparations
1. Check that the correct number of shims
corresponds with your application. See §
11.1.7 .
For adjusting the compression force of the
hose, see §
8.8 .
2. Check that the lubricant level is above the
minimum level line in the inspection window. If
necessary add Bredel Genuine Hose Lubricant
via the breather/vent plug. See also §
8.4 .
3. Connect the electric motor in conformance with
the locally applicable rules and regulations. See
the manual of the electric motor. Ensure that the
electrical installation work is carried out by
qualified personnel.
4. Check the rotation of the rotor. The rotational
direction of the rotor must match the
configuration of suction and discharge piping.
5. Check that the breathers on the rear of the
pump and on the gearbox are free from any
obstruction.
6. Check to ensure the gearbox has been filled
with the proper oil level.