Watson-Marlow Bredel 265 - Manual (Page 29)

INSTALLATION
29
5.4.2 Lifting the pumphead
1. Lift the pumphead by using the lifting hole on
the top of the pump cover, see §
5.4.3 .
2. During the (dis)assembly of the pumphead from
the adaption ring, use the special-made lifting
tool (A).
The working load limit (WLL) of the lifting tool is
1100 kg/2420 lbs. For weights of the pumphead,
see §
11.1.5 .
5.4.3 Lifting the pump cover
1. The cover (B) can be lifted by using the lifting
hole (C) on the top of the pump cover.
For weights of the pump cover, see §
11.1.5 .
The cover can also be lifted by means of a
cover lifting device (A), also called CLD. For
mounting the cover lifting device, see §
8.9.4 for
the horizontal configuration and see § 8.9.5 for
the vertical configuration.
A
The lifting tool makes sure that the
pumphead is positioned vertically
in front of the adaption ring. This
makes it easier to mount or dis-
mount the pumphead. The lifting
tool can be supplied by Bredel.
A
C
B