Westermo TD-32 - Manual (Page 35)

35 6178-2203
Result Codes
When a command is sent from the terminal the modem replies with a result code. The reply may be
either in Long Form i.e. text (V1) or in Short Form, i.e. a two digit code (V0). The result code in
Long Form is followed by <CR><LF> and in Short Form by <CR>. Using the Q1 command enables
the result codes. The result codes and their short forms are as follows:
00 OK The OK code is returned to acknowledge execution of a
command line.
01 CONNECT The modem will send this result code upon connecting
with 300 baud.
02 RING Incoming ringing is detected on the line.
03 NO CARRIER No carrier is detected.
04 ERROR The modem will send this result code when it’s unable to
execute a command contained on the command line.
05 CONNECT 1 200 For connections with 1 200 baud.
06 NO DIALTONE No dial tone is received.
07 BUSY Busy (engaged) signal is detected on the line.
08 NO ANSWER No answer from remote modem detected on the line until
the expiration of the time S7.
09 CONNECT 600 For connections with 600 baud on the DTE.
10 CONNECT 2 400 For connections with 2 400 baud on the DTE.
11 CONNECT 4 800 For connections with 4 800 baud on the DTE.
12 CONNECT 9 600 For connections with 9 600 baud on the DTE.
16 CONNECT 19 200 For connections with 19 200 baud on the DTE.
17 CONNECT 38 400 For connections with 38 400 baud on the DTE.
18 CONNECT 57 600 For connections with 57 600 baud on the DTE.
24 DELAYED If dialled number not allowed to dial yet.
32 BLACKLISTED If dialled number is not allowed.
33 FAX If it’s a fax connection.
34 +FCERROR Error in fax connections.
35 DATA Connected as data modem.
40 CARRIER 300 300 baud carrier.
42 CARRIER 600 600 baud carrier.
46 CARRIER 1 200 1 200 baud carrier.
47 CARRIER 2 400 2 400 baud carrier.
48 CARRIER 4 800 4 800 baud carrier.
49 CARRIER 7 200 7 200 baud carrier.
50 CARRIER 9 600 9 600 baud carrier.
51 CARRIER 12 000 12 000 baud carrier.
52 CARRIER 14 400 14 400 baud carrier.
66 COMPRESSION: CLASS 5 MNP class 5 compression active.
67 COMPRESSION: V.42 bis V.42 bis compression active.
69 COMPRESSION: NONE No compression active.
70 PROTOCOL: NONE No error correction active.
77 PROTOCOL: LAPM LAPM error correction active.
80 PROTOCOL: ALT MNP4 error correction active.
81 PROTOCOL: ALT-CELLULAR MNP10 with Cellular active.
100 NOVRAM ERROR Error in memory.
101 NO NOVRAM No memory mounted.
102 SWITCH ERROR Error in switches.
103 INACTIVITY TIMEOUT Inactivity time limit reached.