Westermo TD-32 - Manual (Page 41)

41 6178-2203
S27 – Bit Mapped Option Status (Read only)
Bit Interval Default Description
0..1,3 0..3,0..1 0 Synchronous/Asynchronous selection:
0.0-AT&M0 or AT&Q0
1.0-AT&M1 or AT&Q1
2.0-AT&M2 or AT&Q2
3.0-AT&M3 or AT&Q3
0.1-AT&Q4
1.1-AT&Q5
2.1-AT&Q6
2 0..1 0 Reserved
4..5 0..2 0 Synchronous clock selection:
0-Internal clock (AT&X0)
1-External clock (AT&X1)
2-Slave clock (AT&X2)
60..1 0 CCITT or Bell mode selection:
0-CCITT mode (ATB0)
1-Bell mode (ATB1)
7 0..1 0 DTR dial option:
0-No DTR dial (AT&B0)
1-Dialling of stored number,
with DTR (AT&B1)
S29 – Time for ”Hook-flash” (Not stored with &W)
If ”!” is used at dialling the modem will go on-hook for a short while.
Default 0 {0..255} (1/100 sec).
S30 – Inactivity Timer (Not stored with &W)
Sets the length of time that the modem will stay on-line before disconnecting
when no data is sent or received. 0 disables this time control.
Default 0 {0..255} (10 sec).