Airmar PB200 - Manual (Page 123)

PB200 WeatherStation User Manual revision 1.000
Proprietary and Confidential
117
$PAMTC,COMP,RESETALL
Summary
Reset the user calibration coefficients and damping control to the default values.
Syntax
$PAMTC,COMP,RESETALL*hh<CR><LF>
Reply
The weather station will reset the user calibration coefficients and damping
control (fields 1-9) and reply with:
$PAMTR,COMP,RESETALL,
<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>*hh<CR><LF>
where fields <1> through <9> contain the data from the weather station’s
nonvolatile EEPROM, as defined in the “Q”, Query Command.
$PAMTC,COMP,RESETCAL
Summary
Reset the user calibration coefficients to the default values.
Syntax
$PAMTC,COMP,RESETCAL*hh<CR><LF>
Reply
The weather station will reset the user calibration coefficients (fields 1 – 6) and
reply with:
$PAMTR,COMP,RESETCAL,
<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>*hh<CR><LF>
where fields <1> through <9> contain the data from the weather station’s
nonvolatile EEPROM, as defined in the “Q”, Query Command.
$PAMTC,COMP,RESETDAMP
Summary
Reset the user damping control to the default values.
Syntax
$PAMTC,COMP,RESETDAMP*hh<CR><LF>
Reply
The weather station will reset the user damping control (fields 7-9) and reply
with:
$PAMTR,COMP,RESETDAMP,
<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>*hh<CR><LF>