Airmar PB200 - Manual (Page 148)

PB200 WeatherStation User Manual revision 1.000
Proprietary and Confidential
142
_ NMEA 0183 RECEIVED SENTENCE _
$PAMTC,
SIM
Summary
Turn Simulate Mode On or Off.
Syntax
One of the following forms:
$PAMTC,SIM,0*hh<CR><LF>
Turn Simulate Mode Off
(default state).
$PAMTC,SIM,1*hh<CR><LF> Turn Simulate Mode On.
$PAMTC,SIM,Q*hh<CR><LF> Query Simulate state.
The $PAMTC,SIM,Q command provides a query function to allow reading the current
Simulate state. The reply to the $PAMTC,SIM,Q command is one of the following:
$PAMTR,SIM,0*hh<CR><LF>
Simulate Mode is Off
$PAMTR,SIM,1*hh<CR><LF> Simulate Mode is On
Notes
The Simulate Mode is not stored in EEPROM. On power up, the Simulate Mode
returns to the Off state.
This command performs the same function as the transmitted proprietary NMEA
2000® PGN 126720-35.