Airmar PB200 - Manual (Page 135)

PB200 WeatherStation User Manual revision 1.000
Proprietary and Confidential
129
_ NMEA 0183 RECEIVED SENTENCE _
$PAMTC,
ERST
Summary
Reset the user portion of nonvolatile EEPROM to its factory default state.
Syntax
$PAMTC,ERST*hh<CR><LF>
Notes
The following data items are saved in nonvolatile EEPROM within the PB200
WeatherStation. For each item, the default value, and the command used to
change the value is shown.
Item Default value Changed via command
Azimuth offset 0.0° $PAMTC,ATTOFF
Pitch offset 0.0° $PAMTC,ATTOFF
Roll offset 0.0° $PAMTC,ATTOFF
List of sentences
enabled for transmission
See the description for the
$PAMTC,EN command
$PAMTC,EN
Rates of transmission of
sentences
See the description for the
$PAMTC,EN command
$PAMTC,EN
Allow COG to be used
instead of internal
compass heading in true
wind calculations
Disabled $PAMTC,OPTION
GPS fix 2D, 3D, or Auto Auto $PAMTC,OPTION
Altitude settings 0,1,2 $PAMTC,ALT
Other items related to factory calibration of the sensor are also saved in
EEPROM, but these items are not affected by the $PAMTC,ERST command.
This command performs the same function as the received proprietary NMEA
2000® PGN 126720-130.