ARM Electronics DVRHD OSD - Manual (Page 11)

OSD Setup Manual
10
„ MAC Address 1
This item identifies the first Media Access Control (MAC) address of the DVR.
„ Software Upgrade Via Local Device
This item is used for updating software of the Versatile H.264 DVR via local device.
The menu is displayed as follows.
Software Upgrade via Local Device
Upgrade Version
xxxx-xxxx-xxxx-xxxx Select
No
Connect an USB storage device containing upgrade software to the DVR; the
available upgrade files will be listed in the menu. To update the system, select a file
and use UP / DOWN keys to choose <Yes>. Press ENTER to confirm the selection
and start the upgrade process. The Versatile H.264 DVR will download the
software, update the system files, and reboot automatically.
The upgrade may take several minutes to save the changes in the memory of the
system. After the DVR is rebooted, please check the software version again.
NOTE: Power interruption is NOT allowed during the software update.
Ensure that no power interruption can occur until the DVR is completely
rebooted.
NOTE: Do not remove the external USB ThumbDrive / DVD+RW before the
DVR has completely shutdown (hard drive and fan are off). Removing the
external USB ThumbDrive / DVD+RW before shutdown can cause the
system to update improperly.
„ Software Upgrade Via Internet
The item is used to upgrade the unit’s software via the internet. Select one of the
listed software versions and choose <Yes>. The Versatile H.264 DVR will
download the software, update the system files, and reboot automatically.
NOTE: This menu item is only available in 8CH and 16CH models.