ARM Electronics DVRHD OSD - Manual (Page 9)

OSD Setup Manual
8
<To input characters>
Move the cursor by pressing Direction keys and press ENTER to select characters.
Alternatively, press channel keys 1~9 to directly enter number 1~9, press channel
key 10 to directly enter number 0, or press “CALL” key to directly enter a period
mark “.”. The hot keys are for speeding up inputs of IP addresses or etc.
<To move the cursor in entry field>
Select <Ż> / <Ź> and press ENTER to move the cursor to left / right in the entry
field.
<To delete previous character>
Select <Backspace> and press ENTER, or press DOME.
<To delete current character>
Select <Delete> and press ENTER..
<To exit the virtual keyboard>
Select <OK> and press ENTER to save the settings and exit, otherwise press ESC
or select <Cancel> and press ENTER to exit without saving changes.