ARM Electronics DVRHD OSD - Manual (Page 46)

OSD Setup Manual
45
„ Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event. Select
<ON> to enable Video Loss alarm events, or <OFF> to disable.
„ Motion Detect
This item allows users to enable or disable motion detection function of Versatile
H.264 DVR. Select <ON> to enable Motion Detect alarm events, or <OFF> to
disable. If motion detection function is enabled, it is required to define motion
detection parameters such as detection area and sensitivity settings in <Detection
Config>.
„ Motion Detect Indicator
This item allows users to display/ hide the motion detection indicators. Select
<ON> to display the indicators, or <OFF> to hide them.
„ Detection Config
If motion detection function is enabled, it is required to define the motion detection
parameters such as detection area and sensitivity settings. Select a channel for
setting the parameters, move the cursor to <Detection Config> and press ENTER.
The detection configuration menu displays as follows.
Detection Config
Detected Area Setup
Sensitivity
Block Threshold
88%
4
- Detected Area Setup
After selected this item, the detected area is displayed as follows. The
detection area consists of 192 (16×12) detection grids.
Use the Direction keys to move the cursor and press ENTER to select or
de-select a grid. Press MODE to select all of the grids for detection; press
MODE again to de-select all of the grids.