ARM Electronics DVRHD OSD - Manual (Page 66)

OSD Setup Manual
65
Step 4. Click <Step2b>. Assign each partition to a drive letter. After the assignment of
HDDs are made, click <Save Assignments> button.
Step 5. Click <Step3>. Then, click <Start Driver> button. Now, reboot the PC for the
changes to take effect. The HDD installation is now completed.
After the DVR’s HDD is correctly installed, videos in the DVR’s HDD can be played back by
using the DVRPlayer. Refer to Appendix C: DVRPlayer for detail instruction about the
operation of the DVRPlayer.
2
1
3
2
1