H3C Technologies H3C S3100 Series Switches - Manual (Page 100)

2-9
Protocol-Based VLAN Configuration Task List
Complete these tasks to configure protocol-based VLAN:
Task Remarks
Configuring a Protocol Template for a Protocol-Based VLAN Required
Associating a Port with a Protocol-Based VLAN Required
Displaying Protocol-Based VLAN Configuration Optional
Configuring a Protocol Template for a Protocol-Based VLAN
Configuration prerequisites
Create a VLAN before configuring the VLAN as a protocol-based VLAN.
Configuration procedure
Follow these steps to configure the protocol template for a VLAN:
To do... Use the command... Remarks
Enter system view system-view —
Enter VLAN view vlan vlan-id —
Configure the protocol
template for the VLAN
protocol-vlan [ protocol-index ] { at | ip | ipx
{ ethernetii | llc | raw | snap } | mode
{ ethernetii etype etype-id | llc dsap dsap-id
ssap ssap-id | snap etype etype-id } } Required
By default, no protocol
template is configured for
the VLAN.
When configuring a protocol template for a protocol-based VLAN, use the at, ip or ipx keyword to
configure a standard template to match AppleTalk, IP, and IPX packets respectively, and use the mode
keyword to configure a user-defined template.