H3C Technologies H3C S3100 Series Switches User Manual
Page 21
1-8
lists the CLI views provided by S3100 series Ethernet switches, operations that can be
performed in different CLI views and the commands used to enter specific CLI views.
Table 1-2 CLI views
View
Available
operation
Prompt example
Enter method
Quit method
User view
Display
operation status
and statistical
information of
the switch
<Sysname>
Enter user view once
logging into the switch.
Execute the quit
command to log
out of the
switch.
System
view
Configure
system
parameters
[Sysname]
Execute the system-view
command in user view.
Execute the
quit or return
command to
return to user
view.
100 Mbps
Ethernet port
view:
[Sysname-Ethern
et1/0/1]
Execute the interface
ethernet command in
system view.
Ethernet
port view
Configure
Ethernet port
parameters
1000 Mbps
Ethernet port
view:
[Sysname-Gigabi
tEthernet1/1/1]
Execute the interface
gigabitethernet command
in system view.
Aux1/0/0
port (the
console
port) view
The S3100
series do not
support
configuration on
port Aux1/0/0
[Sysname-Aux1/
0/0]
Execute the interface aux
1/0/0 command in system
view
VLAN view
Configure VLAN
parameters
[Sysname-vlan1]
Execute the vlan
command in system view.
VLAN
interface
view
Configure VLAN
interface
parameters,
including the
management
VLAN
parameters
[Sysname-Vlan-i
nterface1]
Execute the interface
Vlan-interface command
in system view.
Loopback
interface
view
Configure
loopback
interface
parameters
[Sysname-LoopB
ack0]
Execute the interface
loopback command in
system view.
NULL
interface
view
Configure NULL
interface
parameters
[Sysname-NULL
0]
Execute the interface null
command in system view.
Local user
view
Configure local
user parameters
[Sysname-luser-u
ser1]
Execute the local-user
command in system view.
User
interface
view
Configure user
interface
parameters
[Sysname-ui-aux
0]
Execute the
user-interface command
in system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.