H3C Technologies H3C S3100 Series Switches - Manual (Page 877)

1-9
To do… Use the command… Remarks
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three
seconds.
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Configure the type of FTP
operation
ftp-operation { get | put }
Optional
By default, the type of FTP operation is get,
that is, the FTP operation will get a file from
the FTP server.
Configure an FTP login
username
username name
Configure an FTP login
password
password password
Required
By default, neither username nor password
is configured.
Configure a file name for
the FTP operation
filename file-name
Required
By default, no file name is configured for the
FTP operation
Configure size of a file to
be uploaded in an FTP
test
filesize file-size
Required
By default, the file is 1 MB.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ] Required
You can execute the command in any view.
4) Configuring HTTP test on HWPing client
Follow these steps to configure HTTP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client function
is disabled.
Create an HWPing test group and
enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type test-type http
Required
By default, the test type is ICMP.
Configure the destination IP
address
destination-ip ip-address
Required
When you use H3C S3100 Series
Switches as HWPing Client for http
test, the destination address can be
host name or IP address.
By default, no destination address is
configured.
Configure dns-server dns-server ip-address
Required: When you use H3C S3100
Series Switches as HWPing Client for
http test and set the destination
address as host name.
By default, no IP address of the DNS
server is configured.