H3C Technologies H3C S3100 Series Switches - Manual (Page 892)

1-24
# Start the test.
[Sysname-hwping-administrator-ftp] test-enable
# Display test results
[Sysname-hwping-administrator-ftp] display hwping results administrator ftp
HWPing entry(admin administrator, tag ftp) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 3245/15891/12157
Square-Sum of Round Trip Time: 1644458573
Last complete test time: 2000-4-3 4:0:34.6
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[Sysname-hwping-administrator-ftp] display hwping history administrator ftp
HWPing entry(admin administrator, tag ftp) history record:
Index Response Status LastRC Time
1 15822 1 0 2000-04-03 04:00:34.6
2 15772 1 0 2000-04-03 04:00:18.8
3 9945 1 0 2000-04-03 04:00:02.9
4 15891 1 0 2000-04-03 03:59:52.9
5 15772 1 0 2000-04-03 03:59:37.0
6 15653 1 0 2000-04-03 03:59:21.2
7 9792 1 0 2000-04-03 03:59:05.5
8 9794 1 0 2000-04-03 03:58:55.6
9 9891 1 0 2000-04-03 03:58:45.8
10 3245 1 0 2000-04-03 03:58:35.9
For detailed output description, see the corresponding command manual.
If you are downloading a file from the server, you do not need to specify an FTP operation type. For
details, see section Configuring FTP test on HWPing client .
HTTP Test
Network requirements
An H3C S3100 series Ethernet switch serves as the HWPing client, and a PC serves as the HTTP
server. Perform an HWPing HTTP test between the switch and the HTTP server to test the connectivity
and the time required to download a file from the HTTP server after the connection to the server is
established.