H3C Technologies H3C S3100 Series Switches - Manual (Page 896)

1-28
Negative SD Number:30 Negative DS Number:24
Negative SD Sum:64 Negative DS Sum: 41
Negative SD average:2 Negative DS average:1
Negative SD Square Sum:200 Negative DS Square Sum:161
SD lost packets number:0 DS lost packet number:0
Unknown result lost packet number:0
[Sysname-hwping-administrator-Jitter] display hwping history administrator Jitter
HWPing entry(admin administrator, tag Jitter) history record:
Index Response Status LastRC Time
1 274 1 0 2000-04-02 08:14:58.2
2 278 1 0 2000-04-02 08:14:57.9
3 280 1 0 2000-04-02 08:14:57.6
4 279 1 0 2000-04-02 08:14:57.3
5 280 1 0 2000-04-02 08:14:57.1
6 270 1 0 2000-04-02 08:14:56.8
7 275 1 0 2000-04-02 08:14:56.5
8 263 1 0 2000-04-02 08:14:56.2
9 270 1 0 2000-04-02 08:14:56.0
10 275 1 0 2000-04-02 08:14:55.7
For detailed output description, see the corresponding command manual.
SNMP Test
Network requirements
Both the HWPing client and the SNMP Agent are H3C S3100 series Ethernet switches. Perform
HWPing SNMP tests between the two switches to test the time required from Switch A sends an SNMP
query message to Switch B (SNMP Agent) to it receives a response from Switch B.
Network diagram
Figure 1-7 Network diagram for the SNMP test
Configuration procedure
z Configure SNMP Agent (Switch B):
# Start SNMP agent and set SNMP version to V2C, read-only community name to public, and
read-write community name to private.
<Sysname> system-view
[Sysname] snmp-agent
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent community read public
[Sysname] snmp-agent community write private