H3C Technologies H3C SR6600-X - Manual (Page 21)

11
Figure 6 Marking the positions of cage nuts
3. Insert one edge of a cage nut into the hole.
4. Use a flat-blade screwdriver to compress the other edge of the cage nut, and then push the cage
nut fully into the hole.
5. Repeat steps 3 and 4 to install other cage nuts to all the marked positions on the rack post.
Figure 7 Installing a cage nut
Installing the mounting brackets to the router
If you have ordered an air filter, install it to the router before you install the mounting brackets. For the
installation procedure, see " Installing an air filter ."
Before you install the router to a rack, install the front mounting brackets to the left and right sides of the
router.
To install the front mounting brackets to the router, align the screw holes on the mounting brackets with the
screw holes on the left and right sides of the chassis, and then use a Phillips screwdriver to fasten the
screws.
5RU
5RU