H3C Technologies H3C MSR 50 - Manual (Page 59)

51
* *
**************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Apr 16 2008
CPU Type : MPC7448
CPU L1 Cache : 32KB
CPU L2 Cache : 1024KB
CPU Clock Speed : 1700MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
NOTE:
•
The extended BootWare menu is referred to as main BootWare menu hereinafter in this manual unless
otherwise specified.
• The sample output above may vary on your device.
If you press Ctrl+B when the system displays “Press Ctrl+B to enter extended boot menu...”, the system
prompts for the BootWare password:
Please input BootWare password:
After you enter the correct password, the system enters the main BootWare menu. (The initial password
is null. You have three chances to provide the correct BootWare password. If you have tried three times
but failed, you need to reboot the system).
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTEND-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
==========================================================================