H3C Technologies H3C MSR 50 - Manual (Page 71)

63
Displaying all files
Enter 1, and the system displays:
Display all file(s) in cfa0
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 640199 Dec/20/2007 09:53:16 N/A cfa0:/logfile/logfile.log |
|2 22165484 Dec/20/2007 09:18:10 B+S cfa0:/update.bin |
|3 1181 Dec/20/2007 09:42:54 N/A cfa0:/startup.cfg |
|4 22165484 Dec/20/2007 09:42:28 M cfa0:/main.bin |
==========================================================================
Setting the application file type
Enter 2 in the file control submenu to enter the set application file type submenu:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 22165484 Dec/20/2007 09:18:10 B+S cfa0:/update.bin |
|2 22165484 Dec/20/2007 09:42:28 M cfa0:/main.bin |
|0 Exit |
========================================================================
Enter file No:
Enter the number of the file to be modified and press Enter, the system will prompt you to modify the file
type:
Modify the file attribute:
==========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
==========================================================================
Enter your choice(0-4):
You can set the file type to M (main) or B (backup) or cancel the setting by entering digits 1 to 4. Refer
to
Introduction on page 41 for details.
Setting the configuration file type
Enter 3 in the file control submenu to enter the configuration file type submenu:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 1181 Dec/20/2007 09:42:54 N/A cfa0:/startup.cfg |
|0 Exit |
==========================================================================
Enter file No:
Enter the number of the file to be modified and press Enter, the system prompts you to modify the file type:
Modify the file attribute: