H3C Technologies H3C MSR 50 - Manual (Page 82)

74
CAUTION:
•
Hold the memory bar by its edge and avoid touching the components on its surface. An improper
operation might result in damage.
• It is normal that you feel hard when removing the memory bar, but do not overexert.
Use the memory bars provided by Technology only. Otherwise, anomalies might occur to the device.
Memory Bar Structure
Figure 58 Memory bar structure
Memory Bar Slot
Figure 59 MPUF memory bar slot
Installing/Removing Memory Bar
Follow the steps below to install the memory bar:
Step1 Make sure all power interfaces are shut down, and then proceed.
Step2 Align the memory bar golden finger with the slot on the main board.
Step3 Insert the memory bar into the slot along the slot guides.
Step4 Press the memory bar vertically until you hear a chick. This indicates the Memory bar is fixed within the
slot.
Step5 Check if the spring clip has locked the memory bar slot.