H3C Technologies H3C MSR 30 - Manual (Page 33)

25
Mounting brackets
Figure 20 Mounting brackets
(1) Left-front mounting bracket (2) Right-front mounting bracket
(3) Left-rear mounting bracket (4) Right-rear mounting bracket
Installation process
Step1 Check the grounding and stability of the rack. Use the screws to fix the mounting ears at both sides of the
front panel or the rear panel of the router.
Step2 Put the router in a rack tray. For MSR 30-16/30-20 routers, use mounting ears on the rear panel if no tray
is available. Depending on the actual situation, slide the router along the chassis guides to an
appropriate place.
Step3 Fasten the mounting ears with the recess screws to fix the router in the rack horizontally and firmly. The
specifications of recess screws should satisfy the installation requirements and the surface of the screws
should be anti-rust.