H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 209
Advertising
195
Figure 95 Portal server configuration
2.
Configure the IP address group:
a.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree
to enter the portal IP address group configuration page.
b.
Click Add to enter the page shown in
c.
Enter the IP group name.
d.
Enter the start IP address and end IP address of the IP group. Make sure that the client's IP
address is in the IP group.
e.
Select a service group. By default, the group Ungrouped is used.
f.
Select the IP group type Normal.
g.
Click OK.
Figure 96 Adding an IP address group
3.
Add a portal device:
Advertising
This manual is related to the following products: